The Digital Output Card can be configured in the following ways:
- 2 Stereo AES/EBU Signals
- 1 Stereo AES/EBU signal / 1 Stereo S/PDIF Signal
- 2 Stereo S/PDIF Signals
The Digital Output Card has two Combicon connectors which are used as follows:
Connector 1
- Stereo Audio, Channels 1 and 2 - AES/EBU / S/PDIF
- Stereo Audio, Channels 3 and 4 - AES/EBU / S/PDIF
Connector 2*
- Clock Input - High Impedance
- Clock Input - 75R Terminated
* active clock selected within HiQnet London Architect
Connector | [Clock Input] | [Audio Output] | ||
---|---|---|---|---|
Signal | 3&4 | 1&2 | 3&4 | 1&2 |
--- | --- | --- | --- | --- |
Pin | [S + -] | [S + -] | [S + -] | [S + -] |
--- | --- | --- | --- | --- |
Clock Input | Positive: to + | AES/EBU | Positive: to + | S/PDIF | Signal: to + |
---|---|---|---|---|---|
Negative: to - | Negative: to - | Signal Ground: to - | |||
nil or -: to S | Shield: to S | Shield*: to S | |||
* Short "S" to "-" for unshielded cable |
Specifications
Digital Outputs | 4 |
---|---|
Digital Output Type | AES/EBU and S/PDIF |
Word Sync Input | ![]() |